Hearthstone deck

How to replace the engine axle tile to avoid engine failure?Hearthstone deck Engine shaft tile is one of the key components of engine operation. When the engine is running, the piston is connected to the crankshaft through the connecting rod, and the crankshaft rotates to make the engine rotate. The shaft tile acts as a gasket between the crankshaft and the crankcase, which can ensure the smooth rotation of the crankshaft, while also reducing the wear between the crankshaft and the crankcase and maintaining the long-term operation of the engine.However, as the use time of the engine and shaft tile increases, the shaft tile may wear and wear, eventually leading to engine failure. Therefore, it is very important to replace the axle tile in time. Next, we will introduce in detail how to replace the engine axle tile to avoid engine failure. Step 1: Determine whether the shaft tile needs to be replaced. Before replacing the shaft tile, it must be determined whether the shaft tile needs to be replaced. Generally speaking, the life of the axle tile is about 30,000-50,000 kilometers of engine use, while in some busy cities and vehicles that often transport heavy objects, the axle tile is more prone to wear, so the time will be shorter. Therefore, it is very important to regularly check whether the axle tiles of the engine need to be replaced. The way to check the shaft tile is to open the crankcase lid and touch the surface of the crankshaft and the surface of the shaft tile with your hand. If the surface of the shaft tile is worn and worn, it is recommended to replace the shaft tile immediately.At the same time, when checking the shaft tiles, you should also check whether the crankshaft is damaged such as cracks and deformation. If necessary, the crankshaft should be repaired or replaced according to the specific situation. Step 2: Determine the specifications of the shaft tile. The specifications of different models of engine shaft tiles may be different. Therefore, before replacing the shaft tile, the correct shaft tile specification information must be obtained from the vehicle manufacturer or auto repair station. At the same time, when purchasing shaft tiles, you should also check the brand and quality of shaft tiles. Choosing high-quality shaft tiles can extend the service life of the engine. Step 3: Replacing the shaft tile requires certain professional knowledge and skills. If you do not have enough experience, it is recommended that you leave this task to a professional to complete. When replacing the shaft tile, it is recommended to take the following steps: 1. Stop the engine and remove all parts, such as crankcase cover, crankshaft, connecting rod, etc.Two. Clean all parts and check for other damage. 3. Take out the old shaft tile and clean the shaft tile seat and shaft tile convex platform to make sure that they are free of impurities. Four. Place the new shaft tile on the shaft tile seat, pay attention to the direction, and ensure that the bottom of the shaft tile is in close contact with the axial tile convex platform. 5. Reinstall all parts, pay attention to the position and order of each part, and make sure that they are installed correctly. 6. Start the engine and check whether the engine is working properly. Summary: Replacing the engine shaft tile is an important part of ensuring the normal operation of the engine. Timely detection and replacement of shaft tiles can avoid engine failure and extend the service life of the engine. However, the premise is that you must know the life and specification information of the shaft tile and seek the help of professionals. If you find a problem with the engine, you should consult a professional mechanic in time to ensure the normal operation of the engine.

Contact Us
Phone：020-83484678